Pressed Steel tank with Staging

Rectangular Pressed Steel Tanks As Per I.S 804 - 1967

PLATES :
1.25 M Square Pressed Steel Plates of 5m.m. and 6m.m. thick with external Flanges of 90o Angle end suitable width for blots connection and interchangeable. The spacing of bolts connection in the Flange will not exceed 80 m.m. and Diametre of Bolts 14 m.m.

BRACING/STAY :
The Side of Tank Plates will be supported by M.S. Bracings at the junction of or more plates. The Stay Bracing attached to the Tank Plates by Bolting with M.S. Cleat. The Stay will be connected sides to bottom and horizontally sides to sides by Bolting.
TOP COVER :
Standard thickness of M.S. Plates shall be provided as "Top Cover" , which rest on Mild Steel cambered Rafter with a circular Standard Manhole with cover and internal access Ladder.
ERECTION :
The tank will be erected with a detailed drawings as per requirement. When the tank is to be erected in ground level, adequate working space is required all-round underneath. The tank also erected on the top of the staging. After erection the tank will be tested for leakage with full satisfaction of customer.
JOINTING MATERIAL :
The material used for jointing, the tank will be insoluble in the liquid to be stored and capable of withstanding the temperature variation in the liquid. It will be of suitable type depending upon the purpose for which the tank is to be used.
NUT BOLTS WASHER :
Bolts and Nuts used for jointing the tank will be hexagonal and finished black and will be supplied with an extra of 5% as spare.
PAINTING :
One shop coat of bitumin paint for inside the tank and one shop coat of anti-corrosive red oxide paint for outside is to be used.

SIZE CAPACITY & APPROXIMATE WEIGHT OF PRESSED STEEL TANKS CAPACITY-ONE CUBIC METRE = 1000 LITERS

NOMINAL SIZE 1.25 M DEEP 2.50 M DEEP NORMAL SIZE 3.75 M DEEP
Plates 5 MM thick throughout Plates 5 MM and 6 MM thick Plates 5 MM and 6 MM thick
Length M
X
Breadth M No. of Plates Nominal Capacity in Litres Total Weight in Kgs. No. of Plates Nominal Capacity in Litres Total Weight in Kgs. Length M X Breadth M No. of Plates Nominal Capacity in Litres Total Weight in Kgs.
1.25 X 1.25 5 1950 400 - - - - - - - - -
2.50 X 1.25 8 3900 700 14 7800 1400 3.75 X 3.75 45 52650 5050
3.75 X 1.25 11 5850 900 19 11700 1900 5.00 X 3.75 54 70200 6100
5.00 X 1.25 14 7800 1200 24 15600 2450 5.00 X 5.00 64 93600 7200
2.50 X 2.50 12 7800 1000 20 15600 2000 6.25 X 5.00 74 11700 8400
3.75 X 2.50 16 11700 1350 26 23400 2650 6.25 X 6.25 85 146250 9550
5.00 X 2.50 20 15600 1650 32 31200 3300 7.50 X 6.25 96 175500 10900
6.25 X 2.50 24 19500 2050 38 39000 3900 7.50 X 7.50 108 210600 12350
3.75 X 3.75 21 17550 1750 33 35100 3390 8.75 X 7.50 120 245700 13650
5.00 X 3.75 26 23400 2200 40 46800 4100 8.75 X 8.75 133 286650 15100
6.25 X 3.75 31 29250 2600 47 58500 4850 8.75 X 10.00 146 327600 16600
7.50 X 3.75 36 35100 3050 54 70200 5550 11.25 X 8.75 159 368550 18150
8.75 X 3.75 41 40950 3500 61 81900 6300 10.00 X 10.00 160 274400 18200
5.00 X 5.00 32 31200 2700 48 62400 4950 11.25 X 10.00 174 421200 20000
6.25 X 5.00 38 39000 3200 56 78000 5800 12.50 X 10.00 188 46800 21500
7.50 X 5.00 44 46800 3700 64 93600 6700 11.25 X 11.25 189 473850 21600
8.75 X 5.00 50 54600 4260 72 109200 7550 12.50 X 11.25 204 526500 23300
10.00 X 5.00 56 62400 4800 80 124800 8450 12.50 X 12.50 220 585000 25200
6.25 X 6.25 45 48750 3800 65 97500 6850 13.75 X 12.50 236 643500 27000
7.50 X 6.25 52 58500 4400 74 117000 7700 13.75 X 13.75 253 707850 29900
7.50 X 7.50 60 70200 4950 84 140400 8850 15.00 X 13.75 270 772200 30950
8.75 X 8.75 77 95550 6450 105 19100 11000 15.00 X 15.00 288 842400 33000
16.25 X 15.00 306 912600 35000
16.25 X 16.25 325 988650 37300

*THE THICKNESS OF SHEETS FOR !.25M X 1.25M X 1.25M TANK ONLY IS 3.15 MM THICK THROUGHOUT TOTAL WEIGHT SHOWN IN THE ABOVE TABLE, EXCLUDING THE WEIGHT OF TOP COVER AND RAFTER FOR TOP COVER

WE ALSO UNDERTAKE FOLLOWINGS:
  1. Turnkey Job for Fabrication, Supply and Erection of Pressed Steel Tank and Staging Including / Excluding Foundation Work.

  2. Complete work of Pipe Lines (Including Supply, Fitting and Fixing of Pipes. Pipe Fittings, Sluice Valves.)

  3. Complete work for supply and erection of highway guard-rails / Beam Crash Barrier.

  4. Hot dip Galvanized P.S. Tank.

ADVANTAGE OF PRESSED STEEL TANK

EASY AVAILABLE:
Pressed steel tank is available in required sizes and capacity in ready stock as per I.S. 804-1967. It saves the time of Construction, avoid the problem of cement, labour and also seasonal hazards.

SHIFTING:
Pressed Steel tank can easily be dismantled, re-erected to require sizes and capacity and can be easily within short time from one to another place.

INCREASE OR DECREASE OF SIZES:
Increase and decrease of sizes and capacities are only possible in P.S. Tank.

TRANSPORTATION:
The maximum weight of each part/component of P.S. Tank is less than 88 kgs. It can be easily handled and transported and always avoid the difficulties of transportation.

ERECTION:
Pressed steel tank can easily be erected even by unskilled labour at site without any trouble. P.S. Tank is not required any welding or riveting at site.

DEFECT/CRACK:
If any part of pressed steel tank found defective or cracked it can easily be repaired or replaced within short time without any difficulties.

RE-SALE VALUE:
Pressed steel tank made up from steel materials and it always have re-sale value.

Copyright 2005 Dhariwal Steel (P) Ltd. All Rights Reserved

Designed by Digital Wonderz